Wireless - Motorola Netopia Administrator's Handbook

Wireless

(supported models)
Wireless
When you click the
Wireless Configuration
Base Settings
When you click the
◆
The wireless function is automatically enabled by default. If you uncheck the Enabled checkbox, the wireless
options are disabled, and the Gateway will not provide or broadcast its wireless LAN services.
◆
The pull-down menu allows you to select and lock the Gateway into the wireless transmission mode you want:
For compatibility with clients using 802.11b (up to 11 Mbps transmission), 802.11g (up to 20+ Mbps), 802.11a
(up to 54 Mbit/s using the 5 GHz band), or 802.11n (from 54 Mbit/s to 600 Mbit/s with the use of four spatial
streams at a channel width of 40 MHz), select B/G/N. To limit your wireless LAN to one mode or the other,
select G-only , N-only
link in the links bar, the menu expands.
link, the Wireless Base Settings page appears.
B/G
G-only
N-only
A-only
, A-only , or B-only , or some combination that applies to your setup.
B-only
B/G/N
A/N
25