Read This First - ProMinent multiFLEX M10 User Manual

R e a d t h i s f i r s t !
3 . 1
ONE CONTROLLER – MANY APPLICATIONS
Controllers are shipped configured with a wide range of sensors
for one or more cooling towers, multiple boilers, hot & chilled closed loops,
condensate monitoring, waste water control and monitoring...
YOUR CONTROLLER – SENSOR SET
The installation instructions for your specific controller are
in the HELP section YELLOW pages.
HELP is the last tab in the manual binder.
YOUR APPLICATION CHANGES
The controller can be completely reconfigured using the keypad or optional browser
Feed methods and interlocking can be changed.
pH control can be switched to ORP
A tower controller can be switched to waste water or boiler-condensate controls
You need to automate sensor cleaning, measure more water meters,
Feed based on steam production, Bleed on the ratio of make-up & bleed volume...
YOU NEED TO ADD ANOTHER PH, ORP, BOILER CONDUCTIVITY...
Upgrade kits can expand the controller to 14 analog sensors,
10 watermeter-digital inputs and 10 Relay controls
The controller recognizes new sensor drivers and auto-configures.
The digital inputs can be switched between water meter inputs to contact closure inputs.
THE REST OF SECTION 3.
Not all of the following sections apply to your controller or application.
You may need some of these functions as your application evolves.
M714_User_Master.doc
29
Updated Aug. 25, 2015