ProMinent multiFLEX M10 User Manual page 4

Saftey
Electrical Shock Hazard
CAUTION: The operator of this instrument is advised that if the equipment is used in a
manner not specified in this manual, the protection provided by the equipment may be
impaired.
Opening the controller enclosure with the controller plugged in, exposes the user
to AC line voltages on the lower of the two controller circuit boards.
Ground the controller AC power to the ground screw labeled
the bottom, right of the aluminum backplate.
External, 120VAC plug boxes are provided with controllers installed in North
America External plug boxes are grounded to the ground screw labeled
located on the bottom, center of the aluminum backplate.
Water Treatment Controllers operate steam and water valves and may pump
hazardous, corrosive and toxic chemicals. Opening the controller enclosure
exposes user to the risk of electrical shock at power line voltages.
Understand fully the implications of the control setpoints, interlocks and alarms
that you select. Harm to personnel and damage to equipment may result from
mis-application.
Unplug or turn OFF the AC power to the controller if you have any concerns
regarding safety or incorrect controller operation and notify supervisory staff.
YOUR CONTROLLER
Controllers are supplied in many different configurations.
HELP
The
terminating the sensors supplied with your specific controller.
HELP
The
header showing the sensor set supplied with your specific controller.
M714_User_Master.doc
Updated Aug. 25, 2015
USER WARNING : CAUTION
section in the back of this manual contains the information for
section in the back of this manual depicts the installation plumbing
and located on
4