Xlr Pro Certifications; Fcc (United States) Certification; Fcc Labeling Requirements - Digi XLR PRO User Manual

XLR PRO Certifications

The XLR PRO radio frequency (RF) module, when used with approved antennas, complies
with the FCC and IC certifications detailed in this section. For a list of antennas approved
for use with XLR PRO, see XLR PRO Approved Antennas on page 15.

FCC (United States) Certification

The XLR PRO RF module complies with Part 15 of the FCC rules and regulations.
Compliance with the labeling requirements, FCC notices, and antenna usage guidelines is
required. To operate under Digi International FCC Certification, RF modules/integrators
must comply with the following regulations:
1 The system integrator must ensure that the text provided with this device (see FCC-
Required Label Text on page 11) is placed on the outside of the final product and
within the final product operation manual.
2 The XLR PRO RF module may be used only with antennas that have been tested and
approved for use with this module refer to XLR PRO Approved Antennas on page 15.

FCC Labeling Requirements

FCC-Required Label Text
Contains FCC ID: MCQ-XLRP
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (i.) this device may not cause harmful interference and (ii.) this device must accept
any interference received, including interference that may cause undesired operation.
PRELIMINARY DRAFT
XLR PRO Radio Frequency Module User Guide
WARNING: The Original Equipment Manufacturer (OEM) must ensure that FCC
labeling requirements are met. This includes a clearly visible label on the outside of
the final product enclosure that displays the text shown in FCC-Required Label Text
on page 11.
11