About The Xlr Pro Radio Frequency (Rf) Module; Xlr Pro Rf Module Technical Specifications - Digi XLR PRO User Manual

About the XLR PRO Radio Frequency
(RF) Module
The XLR PRO Application Name is a high performance, industrial grade long-range RF
solution using Chirp Spread Spectrum (CSS) technology to maximize range and
significantly increase immunity to interference.
XLR PRO Application Name Technical Specifications
Specification
Transmit Power (Software Selectable)
Receiver Sensitivity
Throughput Data Rate (Software
Selectable)
RF Data Rate
Networking and Security
Transmission
Modulation
Supported Network Topologies
Interface
Encryption
Power Requirements
Supply Voltage
PRELIMINARY DRAFT
XLR PRO Radio Frequency Module User Guide
Description
30 dBm (highest power level)
Up to -120 dBm (see XLR PRO RF Module
Receiver Sensitivity on page 6)
TBD
9 kbps to 3.1 Mbps
Chirp Spread Spectrum (CSS)
Quadrature Phase Shift Keying (QPSK)
Point-to-point, Point-to-multipoint, Broadcast
repeater
Serial CMOS UART and I/O lines
128bit AES
3.8 to 5.5VDC
Note Operation below 4.5V may reduce radio
transmit power performance and LNA
sensitivity.
5