Evaluating Operating Hours Counters - Siemens Simatic ET 200SP Manual

Operating hours counter

8.1 Evaluating operating hours counters

8.1 Evaluating operating hours counters
There are two ways of evaluating the operating hours counters:
● Reading counter states using data records with the instruction RDREC.
● Reading counter states from the user-defined user data variants.
Data records for operating hours counter
You can read out measured values for operating hours in the following data records.
The evaluation of measured data using data records is described in section Reading and
processing measured values (Page 41).
Name of the data record
Data record for energy meter (Page 232)
Measured value data record for advanced
measurement and status values (Page 257)
Measured value data record of user-defined
data record (Page 258)
User data variants for operating hours counters
You can read out measured values for operating hours in the following user data variants.
The evaluation of measured data using user data variants is described in section User data
variants (Page 205).
Name of the user data variant
User-defined user data variant
70
Number of the Comment
data record
DS 143 Phase-specific operating hours counter for phase L1,
phase L2, phase L3 and largest phase-specific operat-
DS 150
ing hours counter L1L2L3
DS 151 Operating hours counters can be selected in a user-
defined manner
Number of the Comment
user data variant
ID 1 or 01 and Operating hours counters can be selected in a user-
H
defined manner
ID 2 or 02
H
Analog input module AI Energy Meter 480VAC/CT HF (6ES7134-6PA00-0CU0)
Manual, 07/2018, A5E42674880-AA