Siemens Simatic ET 200SP Manual page 156

Figure A-11
Error while transferring the data record
The module always checks all the values of the transferred data record. Only if all the values
were transferred without errors does the module apply the values from the data record.
The WRREC instruction for writing data records returns corresponding error codes when
errors occur in the STATUS parameter.
Analog input module AI Energy Meter 480VAC/CT HF (6ES7134-6PA00-0CU0)
Manual, 07/2018, A5E42674880-AA
A.3 Structure of the parameter data record 129 for limit monitoring
Limit parameter data block
Parameter data records
155