Commissioning and operation
5.3 Evaluating the safety function
5.3
Evaluating the safety function
An evaluation is made according to both EN ISO 13849-1 and EN 62061 with the Safety
Evaluation Tool (SET) (http://siemens.de/safety-evaluation-tool).
The result of the evaluation - the SET file
(http://support.automation.siemens.com/WW/view/en/109769506)- is added to the SIOS
entry of this document.
54
Safety engineering with AS‑Interface in the SIMATIC ET 200SP, including typical circuit diagram
Function Manual, 08/2020, A5E44991382002A/RS-AB/002