Connecting An External Microphone Or External Audio Input Source To The Camcorder - Canon XF400 Instruction Manual

4k camcorder
Hide thumbs Also See for XF400:
Table of Contents

Advertisement

Connecting an External Microphone or External Audio Input Source to the Camcorder

To each of the INPUT terminals you can attach commercially available microphones or analog line-in sources
with an XLR connector. To the MIC terminal you can attach commercially available condenser microphones with
their own power supply, and a ∅ 3.5 mm stereo mini plug. To use the INPUT terminals and microphone holder,
the handle unit must be correctly attached to the camcorder.
Follow the procedure below to attach a microphone (refer also to the following illustration). To connect an
external device to the camcorder, plug the device's cable into the desired INPUT terminal ( ).
1 Loosen the microphone lock screw ( ), open the microphone holder and insert the microphone ( ).
2 Tighten the lock screw and put the microphone cable through the microphone cable clamp under
the microphone holder ( ).
3 Plug the microphone cable into the desired INPUT terminal ( ) or the MIC terminal ( ).
Microphone lock screw
NOTES
NOTES
• When using an external microphone, if you use the built-in Wi-Fi functions while recording, noise may be
recorded due to interference from the wireless communication. As much as possible, keep external
microphones away from the camcorder while recording.
Cable clamp
Recording Audio
INPUT 2 / INPUT 1 terminals
79
MIC terminal

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xf405Xf4005

Table of Contents