Interface Card - Toshiba 1NR Hardware Service Manual

|
|
| | | |
| |
|
|
|
| |
|
| |
| |
|
| |
| |
|
| |
|
|
48
SureMark Hardware Service
Table 21. Summary of the offline test menu items (continued)
Menu Item Definition
Hex dump mode A debug mode that is used when attached via an RS-232 that prints
the commands and data that the printer receives. This allows the
application writer to see what data is actually being received at the
printer.
Execute printhead Starts printhead tests.
test
Reset TPH user data Select after you install a new thermal printhead.
Paper Out Sensor Starts the test up.
Test
Code Page Menu Prints out all Code Pages resident in the printer.
Paper Reduction Provides Line Spacing, Blank Space, Barcode Height, and Font Size
options.
Main menu Returns to main menu.
Storing a new serial number in the firmware after a logic or
interface card change
During the servicing process, you might change an interface card or logic card in
the printer.
For proper printer operation, the firmware must correlate the serial number of the
printer with the serial number of the logic card. When you replace the logic card,
you must store the correct serial number in the firmware.
For more information, see the Toshiba Global Commerce Solutions support website:
www.toshibagcs.com/support.
Customer receipt test
Toshiba recommends that you use the offline menus to initiate this test.
Sub-menu (if
applicable) Definition