Appendix A. Parts Listing; How To Use The Fru Catalog - Toshiba 1NR Hardware Service Manual

Appendix A. Parts listing

How to use the FRU catalog

This section describes how to order field replaceable parts for the Models 1NR,
1NA, and 1ND printers, including information on how to use the:
v FRU catalog
v Assembly diagram
v Parts assembly index
"Assembly 1: Models 1NR, 1NA, and 1ND" on page 72 includes drawings of the
printer parts, and a corresponding index for all field replaceable parts on page 72.
The corresponding index provides the part number, the quantity required (units),
and a description of the part.
Listed below is additional information about the parts assembly index.
SIMILAR ASSEMBLIES
If two assemblies contain a majority of identical parts, they are broken down
on the same list. Common parts are shown by one index number. Parts
specific to one or the other of the assemblies are listed separately and
identified by description.
AR (As Required) in the Units column indicates that the quantity is not the
same for all machines.
NP (Non-Procurable) in the Units column indicates that the part is
non-procurable and that the individual parts or the next higher assembly
should be ordered.
NR (Not Recommended) in the Units column indicates that the part is
procurable, but not recommended for field replacement, and that the next
higher assembly should be ordered.
R (Restricted) in the Units column indicates the part has a restricted
availability.
INDENTURE
The indenture is marked by a series of dots located before the parts
description. The indenture indicates the relationship of a part to the next
higher assembly.
No Dot
One Dot
One Dot
Two dots
Two dots
Three dots
Main assembly
Detail parts of a main assembly
Subassembly of the main assembly
Detail part of a one-dot subassembly
Subassembly of a one-dot subassembly
Detail part of a two-dot subassembly
71