Systems Management Support With Ethernet - Snmp - Toshiba 1NR Hardware Service Manual

|
|
|

Systems management support with Ethernet - SNMP

|
|
|
| |
| | |
| | |
|
| | |
|
| | |
|
| | |
|
| | |
| | |
| | |
| | |
| | |
| | |
|
|
|
|
|
|
|
8
SureMark Hardware Service
Note: A printer may take two minutes or more to obtain an IP address via Auto IP
due to the DHCP server time-out and other required delays. Auto IP is
intended for initial printer setup when a DHCP server is not available.
Ethernet printers support Read Only Simple Network Management Protocol (SNMP)
for systems management. The printers support management information base II
(MIB II) for management of the Ethernet configuration (RFC 1213) and a private,
enterprise MIB for the 4610 printers. Any client can retrieve the MIB data from the
printer. The printer will also support up to two SNMP managers to receive SNMP
Traps on state changes in the printer and attached cash drawers.
SNMP is used to manage the printer, not the printing process. SNMP gathers
information about the state of the printer:
v Status: Information regarding the current operating state of the printer (offline / on
line / error conditions).
v Alert: The representation of a reportable event in the printer. An event is a
change in the state of the printer; sent as an SNMP trap.
SNMP contains support for retrieving data (Get and GetNext requests) and
receiving notification of change of state and error conditions via Alerts (or Traps) as
unsolicited messages to listening managers. Setting or changing a condition in the
printer (Set requests) is not supported via SNMP.
Alerts
Clients can register to receive Traps on the following state changes in the printer:
Table 5. Printer state changes
Function Name
Cash Draw Open / DrawerOpened
Closed
Magnetic MICR_CurrentMICRNoiseValue
Interference MICR
CR cover Open / receiptCoverOpen
Closed
DI Cover Open / NA
Closed
Paper Out receiptEmpty
Paper Low NA
Home Error NA
Offline / Online NA
Paper Jam NA
Cutter Jam NA
Up to two SNMP managers can be enabled to receive these alerts. See Statistics
table entries for details on enabling these traps.
4610 Private Enterprise MIB
The 4610 Private Enterprise management information base (MIB) is shown in
Table 6 on page 9. Get request to the printer will retrieve this data.
Note: The access type for all entries is Read Only.
Object Identifier (OID)
1.3.6.1.4.1.1129.2.500.1.1.3.1
1.3.6.1.4.1.1129.2.500.1.1.3.6
1.3.6.1.4.1.1129.2.500.1.1.2.1
1.3.6.1.4.1.1129.2.500.1.3.2.4
1.3.6.1.4.1.1129.2.500.1.1.2.2
1.3.6.1.4.1.1129.2.500.1.3.2.2
1.3.6.1.4.1.1129.2.500.1.3.2.3
1.3.6.1.4.1.1129.2.500.1.3.2.6
1.3.6.1.4.1.1129.2.500.1.3.2.5
1.3.6.1.4.1.1129.2.500.1.3.2.1