Replacing The Logic Card - Toshiba B-FP2D Series Maintenance Manual

2. MAJOR UNIT REPLACEMENT
2.5

Replacing the Logic Card

1) Refer to item no. 6 in Section 2.4 Replacing the Lower Sensor Assembly
2) Totally pull the Assembly and detach the connectors. Remove the screw also.
3) Detach the Logic card from the plastic hook. Detach the two connectors.
Press the hook
NOTE:
1. For this type of connector, you must first open the lock in order for the flex to be removed.
Close (locked)
Connectors
Open
2-7
SPTM-0325
2.5 Replacing the Logic Card
Screw
Logic Card
Pull