Cash Drawer; Printing Width, Speed, And Acoustics - Toshiba 1NR Hardware Service Manual

Cash drawer

A single connector can drive either a single cash drawer or two cash drawers using
a special cable. The connector provides a status line if one of the cash drawers is
open. The cash drawer cannot be activated while the printer is operating.

Printing width, speed, and acoustics

Table 18. Station characteristics
Characteristic Customer receipt station
Speed (see note Up to 80 lps thermal (one-color)
following table)
Paper Width 58 mm or 80 mm
Print Width 34 characters at 12 cpi
44 characters at 15 cpi
48 characters at 17 cpi
57 characters at 20 cpi
Pitch 12, 15, 17, 20 cpi
Note: To ensure reliable operation, the printer reduces throughput when printing
Table 19. Sound characteristics
Type Description
SureMark Printer
Notes:
32
SureMark Hardware Service
Table 17. Cash drawer connector pin designations
Pin Signal
1 Not connected
2 Solenoid 1 drawer
3 Cash drawer status
4 +24 V dc
5 Solenoid 2 drawer
6 Ground
higher densities or continuous (no pause) paper feeding. This might affect
overall throughput. Optimize print density to maximum throughput.
The reduced print speed is based on the number of print dots that are turned
on for a given print line, which is defined as dot utilization. Dot utilization
typically is low for normal character printing and up to 100% for full black line
printing. The SureMark printer operates at 80 lps at low dot utilization, and at
slower speeds as the dot utilization increases. It is also controlled by receipt
motor use.
LwAd
Operating Idling (bels) Operating
(bels)
5.7 N/A
LwAd The declared upper limit of the sound power level for a random
sample of machines.
LpAm
Idling (dB)
(dB)
61.5 N/A
<LpA>m
Operating Idling (dB)
(dB)
47 N/A