Vacon 10 Complete User's Manual page 98

technical data
Ambient operating
temperature
Storage temperature
Relative humidity
Air quality:
- chemical vapours
Ambient
- mech. particles
conditions
Altitude
Vibration:
EN60068-2-6
Shock
IEC 68-2-27
Enclosure class
Pollution degree
Immunity
EMC
Emissions
Standards
Certificates
and manufac-
turer's decla-
rations of
conformity
Table 10.1: Vacon 10 technical data
24-hour support +358 (0)40 837 1150 • Email: vacon@vacon.com
-10 °C (no frost)...+40 / 50°C (depends on the unit size):
rated loadability I
N
Side by side installation for MI1-3 it is always 40°C; For
IP21/Nema1 option in MI1-3 the maximum temparture
is also 40 °C.
-40°C...+70°C
0...95% RH, non-condensing, non-corrosive, no dripping
water
IEC 721-3-3, unit in operation, class 3C2
IEC 721-3-3, unit in operation, class 3S2
100% load capacity (no derating) up to 1000 m. 1% der-
ating for each 100 m above 1000 m; max. 2000 m
3...150 Hz
Displacement amplitude 1(peak) mm at 3...15.8 Hz Max
acceleration amplitude 1 G at 15.8...150 Hz
UPS Drop Test (for applicable UPS weights)
Storage and shipping: max 15 G, 11 ms (in package)
IP20 / IP21 / Nema1 for MI1-3.
PD2
Complies with EN50082-1, -2, EN61800-3
230V : Complies with EMC category C2; With an internal
RFI filter.
400V: Complies with EMC category C2; With an internal
RFI filter
Both: No EMC emission protection (Vacon level N):
Without RFI filter
For EMC: EN61800-3,
For safety: UL508C, EN61800-5
For safety: CB, CE, UL, cUL,
For EMC: CE, CB, c-tick
(see unit nameplate for more detailed approvals)
•
vacon 95
10