Suction Line - Chrysler Stratus RHD 1999 Electronic Service Manual

JA
REMOVAL AND INSTALLATION (Continued)
Fig. 66 Trim Bezel
Fig. 67 Control Module Screws
Fig. 68 Control Module At Bezel Opening
HEATING AND AIR CONDITIONING
Fig. 69 Disconnect Recirculation Cable

SUCTION LINE

REMOVAL
(1) Remove refrigerant from the A/C system using
a refrigerant recovery machine.
(2) Remove suction line clip at right strut tower
(Fig. 70).
(3) Remove quick connect clip (Fig. 71). Disconnect
quick connect at expansion valve end using Special
Tool Kit 7193.
CAUTION: Cap all lines that are not being replaced
and cap the expansion valve tubes.
(4) Disconnect line at compressor end (Fig. 72).
(5) Remove suction line from vehicle.
INSTALLATION
For installation, reverse the above procedures.
Tighten bolts to 22 N·m (200 in. lbs.).
Fig. 70 Suction Line Routing Clip
24 - 27