Table of Contents
Advertisement
12.5.2 USB device handling hints
Bosch Motorsport
6.
Power off the system.
7.
Remove USB device from the vehicle.
8.
Start the WinDarab software.
9.
Click on the 'Import/Export' icon.
10. Select 'Data logger C50/C55/C60/DDU7/DDU8' and click 'OK' when done. The 'Read
measurement data' dialog opens.
Click
'Import/
Export'
11. Click on 'Settings' tab and select the option 'Flash Card/USB Stick'.
12. Activate 'Apply changes'.
13. Insert the USB device into the PC. Data transmission from device starts automatically.
Measurement files are stored automatically in the base folder.
14. Click 'Close' when transmission has finished.
15. Click on the Start button and choose 'Open measurement file'.
16. Select the measurement files from the storage folder.
17. Click on 'Open'.
18. Click in 'New Desktop' to open a new measurement data window.
19. Drag the desired measurement channel from the Channel list and drop it into the
measurement data window. The measurement channel's graph is displayed.
NOTICE
For more detailed descriptions and instructions refer to the Win-
Darab V7 manual.
Using the USB device
Always plug the USB device into vehicle before power up to ensure that all measurement
data is stored on the USB device.
If the USB device is plugged in after recording has started, only the current data is saved.
Data recorded on the C 60 before the USB device is plugged in will not be saved.
Data Logger C 60
Recording and Telemetry | 12
87 / 108
Advertisement
Table of Contents
