Table of Contents
Advertisement
Bosch Motorsport
NOTICE
The 'power-on' state of the PWM output is 'switch open' (0% duty
cycle).
4.
Click 'Finish' when done.
5.
Enter channel name and description.
6.
Click 'OK' when done.
The channel is inserted into the C 60 Project Tree.
Measurement label
pwm_err_ls_out_01_OL
pwm_err_ls_out_01_OT
pwm_err_ls_out_01_SCB
pwm_err_ls_out_01_SCG
Table 2: Diagnostic channels
NOTICE
The diagnosis of PWM output 2-4 is similar.
Data Logger C 60
Function
PWM output 1 error open load
PWM output 1 error over temperature
PWM output 1 error short circuit to battery
PWM output 1 error short circuit to GND
Analog and Frequency Inputs | 10
69 / 108
Advertisement
Table of Contents
