Table of Contents
Advertisement
10.2.1 Measurement channels
10.3 Configuring inputs
10.3.1 Configuring a predefined Bosch sensor with the
Bosch Motorsport
Measurement label
raw_name
raw_name_fi
name
name_fi
Filtered channels are routed through digital low pass filters:
– C 60 uses A/D converter oversampling and digital filtering to recording rate
– Digital filters eliminate 'out-of-band' noise
– Cut-off frequency automatically adjusted to recording rate
– Linear phase - no signal distortion
– Latency compensation - no filter delay in recorded data
'Bosch Sensor Wizard'
1.
Click on 'Measurement Sources' in the Toolbox.
2.
Expand the list of 'I/O Channels' by clicking on '+' in the C 60 Project Tree.
3.
Drag the 'Bosch Sensor Wizard' from the Toolbox and drop it on the desired analog
input channel in the C 60 Project Tree. The 'Bosch Sensor Wizard' opens.
Data Logger C 60
Analog and Frequency Inputs | 10
Function
mV value of sensor
filtered mV value of sensor
physical value of sensor
filtered physical value
37 / 108
Advertisement
Table of Contents
