Table of Contents
Advertisement
10 | Analog and Frequency Inputs
10.4 Computed sources
10.4.1 Configuring computed sources
48 / 108
NOTICE
Measurement of 'Revolution' is similar.
Computed sources receive data from a measurement channel rather than an input pin.
– Sensitivity/Offset calculation on input channel
– Characteristic curve calculation on input channel
– Computed vehicle speed
– PWM output control (covered in a special section)
– Lap trigger (covered in a special section)
Example: Sensitivity/offset calculation on input channel
1.
Click 'Measurement Sources' in the Toolbox.
2.
Drag the 'Sensitivity/Offset' computed source from the Toolbox and drop it on 'Com-
puted Channels' in the C 60 Project Tree.
A 'Computed Sensitivity/Offset Wizard' opens.
3.
Click 'Next' when done.
4.
The second part of the 'Computed Sensitivity/Offset Wizard' opens.
Data Logger C 60
Choose input
channel
Choose unit group
and unit of output
Enter sensitivity and offset
of conversion formula
Bosch Motorsport
Advertisement
Table of Contents
