Table of Contents
Advertisement
12 | Recording and Telemetry
12.5.1 Recording data on USB device
86 / 108
Bit
USB_Device_Gnd
For further information, see the pinlayout of the device.
Colors matching a standard USB cable
Storage device
The recording function can be used with a dedicated Bosch Motorsport USB device. The
USB device has to be preformatted with the Bosch File System (BFS) in RaceCon before
first use.
To format the USB device with the Bosch File System (BFS), do the following steps:
1.
In RaceCon, select 'Tools' - 'Extras' and choose 'Format USB stick'.
2.
Press 'Format'.
An USB device is recognized by Windows as a 'storage medium', but it can only be initial-
ized with RaceCon and read with WinDarab.
1.
Plug an USB device to C 60.
2.
Prepare a recording configuration in RaceCon.
3.
Power on the system and connect with RaceCon to the vehicle.
4.
Download the configuration to the C 60.
5.
Record measurement data. If an USB device is present, the C 60 stores the data in
parallel on the internal memory and the USB device.
Data Logger C 60
Value
GND (black)
Bosch Motorsport
Advertisement
Table of Contents
