9.3.5 Import RaceCon configuration
Bosch Motorsport
1.
Click right on CAN Output of desired bus (CAN1 or CAN2).
2.
Select 'Import...' from menu.
A file browser opens.
3.
Select the input file and click 'OK'.
An 'Import Selection' window opens.
1.
Select channels to import.
2.
Drag and drop the channel to 'CAN Output' of desired CAN bus on right hand side.
3.
Click 'Next'.
If a measurement channel belongs to more than one source (e.g. C 60 and ECU MS
5.1), the 'Solve Label Ambiguity' window opens.
1.
Assign the ambiguous channels to the desired source.
2.
Click 'Finish'.
Data Logger C 60
CAN Bus | 9
35 / 108