Table of Contents
Advertisement
8 | Starting up the C 60
26 / 108
5.
Select 'Data logger C50/C55/C60/DDU7/DDU8' and click 'OK' when done.
6.
The 'Read measurement Data' dialog opens.
7.
Click on 'Modify' button and select the base folder.
8.
Choose 'FTP' as data transmission method.
9.
Choose 'XXXXXXXXXXX' in the Vehicle dropdown list.
10. Activate 'Auto save'.
11. Click 'Save' when done.
Connect the C 60 network cable. Data transmission from the C 60 starts automatically.
Measurement files are stored automatically in the base folder.
1.
Click on 'Close' when transmission has finished.
2.
Click on the Start button and choose 'Open measurement file'.
3.
Select the measurement files from the storage folder.
4.
Click on 'Open'.
5.
Click in 'New Desktop' to open a new measurement data window.
6.
Drag the 'ub' measurement channel from the Channel list and drop it into the meas-
urement data window. 'ub' measurement channel's graph is displayed.
NOTICE
For more detailed descriptions and instructions refer to the Win-
Darab V7 manual.
8.4 Status LEDs
Illustration 1:
Data Logger C 60
Bosch Motorsport
Advertisement
Table of Contents
