Table of Contents
Advertisement
10.5 Hysteresis
Bosch Motorsport
Physical
limits of
channel
NOTICE
Working with automatically created measurement sheets is ex-
plained in chapter 'Setting up an online measurement'.
5.
Click 'Finish' when done.
6.
Enter channel name and description.
7.
Click 'OK' when done. The channel is inserted into the C 60 Project Tree.
The hysteresis function avoids the high-frequent switchover of the measurement channel
value. The hysteresis can be adjusted for each input measurement channel individually
and can be used for further processing.
1.
Click 'Measurement Sources' in the Toolbox.
2.
Drag the 'Hysteresis' computed source from the Toolbox and drop it on 'Computed
Channels' in the C 60 Project Tree.
A 'Hysteresis Wizard' opens.
Data Logger C 60
Analog and Frequency Inputs | 10
Enter physical limits
of the channel
Choose data type of
the measurement
variable
Check the box to force
the channel's
quantization if the
quantization should be a
fixed value in the whole
CAN system
Enter name to
automatically create a new
measurement sheet
49 / 108
Advertisement
Table of Contents
