Jungheinrich DFG 425 Operating Instructions Manual page 70

Daily inspection and servicing of the seat belt
The operator must inspect the seat belt each day to ensure it is in a good condition
and is operating correctly before starting the truck. The following (non-exhaustive)
checks should be made:
– Extract the belt in full and make sure it is not twisted.
– Check the operation of the buckle and the belt returning to the retractor.
Check the automatic locking as follows:
– Park the truck on level ground.
– Try to remove the seat belt with a jerk; the automatic locking should prevent the belt
from being extracted.
F
The truck must not be operated with a faulty seat belt. Replace if at all damaged.
If the truck has been involved in an accident, replace the seat belt.
Damaged seat belts that no longer operate correctly must be replaced by trained
personnel.
E 35