Jungheinrich DFG 425 Operating Instructions Manual page 42

3 Checks and operations to be performed before starting daily work
Truck
– Visually inspect the whole of the truck (especially the wheels and the lifting device)
for obvious signs of damage.
Z
Covers may need to be opened for the inspection.
Checking the motor oil - TFG
– Remove the dipstick (32).
– Wipe the dipstick with a lint-free cloth
and put in back fully into its port.
– Remove the dipstick again and check
whether the oil level is between the
MIN and MAX markings.
– If the oil level is below the centre point,
remove the fuel cap (31) and add the
correct grade of oil to the motor until
the oil level has reached the MAX
mark on the dipstick.
Checking the motor oil - DFG
– Remove the dipstick (33).
– Wipe the dipstick with a lint-free cloth
and put in back fully into its port.
– Remove the dipstick again and check
whether the oil level is between the
MIN and MAX markings.
– If the oil level is below the centre point,
remove the fuel cap (34) and add the
correct grade of oil to the motor until
the oil level has reached the MAX
mark on the dipstick.
34
31
32
33
E 7