Jungheinrich DFG 425 Operating Instructions Manual page 50

o
MSG 65 seat
To achieve optimal seat cushioning the driver's seat must be adjusted according to
the driver's weight.
Adjusting the seat to the driver's weight:
– Sit on the driver's seat. When the correct weight adjustment has been made, the
arrow of the driver weight display (48) will be above the calibration line. If the arrow
is facing too far to the left or right, the seat must be adjusted to the driver's weight.
– To do this, move the weight adjustment lever (47) approx. 90° forward.
– To set the seat to a lesser weight, push the weight adjustment lever (47) down.
– To set the seat to a greater weight, push the weight adjustment lever up.
– After adjusting, return the lever to its original position.
Adjusting the backrest incline:
– Sit on the driver's seat.
– Lift up the backrest tilt adjuster (45) and adjust the incline of the backrest.
– Release the backrest tilt adjuster (45) to lock the backrest in position.
Adjusting the seat position:
– Pull up the longitudinal adjuster (46) and push the driver's seat forwards or
backwards to the desired position.
– Engage the longitudinal adjuster (46) in position again.
F
The longitudinal adjuster must be securely located in the desired position. The
driver's seat setting must not be changed during travel.
48
47
46
45
E 15