Jungheinrich DFG 425 Operating Instructions Manual page 40

Control /
Item
Display
16 Parking brake lever
17 Steering wheel
Steering column adjusting
18
lever
19 Ignition / starter switch
20 Slow travel / brake pedal
21 Accelerator
22 Auxiliary hydraulics (ZH1)
Sideshift
23 Auxiliary hydraulics (ZH2)
24 Mast tilt control lever
25 Lift/lower control lever
26 Warning switch
27 Travel direction switch
Function
Applies / releases parking brake.
To engage, turn switch to position 1.
t
To release, turn switch to position 0.
Pull up lever to engage.
Push lever forward to release.
t Steers truck in desired direction.
t Adjusts the steering column tilt.
Switches power supply on and off.
Starts and stops motor. Removing the
t
ignition key prevents the truck from being
switched on by unauthorised personnel.
1. Range: controls slow travel.
t
2. Range: applies operating brake.
t Controls motor speed / travel and lift speed.
o Moves the load fork to the right / left.
o Intended for hydraulic attachments.
Tilts the mast forward and backward.
To tilt the mast forward: push the lever
t
forward.
To tilt the mast backward: pull the lever
back.
Raises and lowers the fork carriage
To raise the fork carriage: pull the lever
t
back.
To lower the fork carriage: push the lever
forward.
t Triggers an audible warning.
t Selects the travel direction.
E 5