Jungheinrich DFG 425 Operating Instructions Manual page 49

Adjusting the seat position:
– Pull up the locking lever (44) of the
driver's seat lock in the direction of the
arrow and push the seat forwards or
backwards to the desired position.
– Engage locking lever (44) in position
again.
F
The driver's seat must be securely
located in the desired position. The
driver's seat setting must not be
changed during travel.
Z
Always put the seat belt on before
starting the truck. For further information
see section 4.4.
Z
The procedure for adjusting the driver's seat applies to standard models. For other
models, follow the manufacturer's adjustment instructions.
When adjusting, ensure that all controls are within easy reaching distance.
Z
It is essential to set the right weight, as this will reduce the extent of vibration exerted
on the driver's body.
Some trucks may be fitted with a deadman switch, i.e. the truck only starts when the
driver is positioned on the seat.
E 14
40
41
42 43 44