Sungrow SG2KTL-S User Manual page 31

User Manual
2. Fasten the screws with appropriate torque.
Screw a M5 screw onto the chosen concrete wall.
Step 3
In order to avoid electrical shock or other injury, inspect if there is electricity
or plumbing installation before drilling holes.
Fasten the backplate to the wall with the supplied expansion bolt set. The
Step 4
torque for fastening the nut should be at least 10 N m.
Hang the inverter onto the backplate and lock the device.
Step 5
4 Securing Inverter to the Wall
23