Sungrow SG2KTL-S User Manual page 44

5 Electrical Connection
The DC cables must be flexible wires.
DC Connector Assembling Procedure:
Make sure that all the DC and AC cables to the inverter are not live before
you start the electrical work.
Strip off 7mm insulation layer from all
Step 1
DC cables.
Assemble cable ends with crimp
Step 2
contacts by crimping pliers.
Lead cable through cable gland.
Step 3
Insert the crimp contact into the
Step 4
insulator until it snaps into place.
Then pull gently to check if it is
correctly engaged.
Screw the cable gland to front
Step 5
insulator with tightening torque
2.5...3 N m.
36
User Manual