Connection Of The Charging Station To The Power Supply - Siemens SIMATIC HMI Operating Instructions Manual

Installation and connection

4.6 Connection of the charging station to the power supply

4.6 Connection of the charging station to the power supply
Requirements
● The charging station is mounted according to the specifications in this document.
● Cable plug included in the scope of supply
● Three-core cable, flexible, 0.75 mm²
● End sleeves
Pin assignment
Procedure for mounting the cable plug
1. Screw the cables to the contacts in the socket insert and mount the socket.
The following figure shows an exploded view of the cable plug:
①
②
③
70
Pin Assignment
1 +24 VDC
2 n. c.
3 GND 24 V
4 PE
Socket insert
Coupling bush
Seal
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01