Operating Safety - Siemens SIMATIC HMI Operating Instructions Manual

● ISO 13850
● IEC 62061
● 98/37/EC
Requesting certificates
Copies of the certificates and associated reports can be requested from the following
address:
Siemens Aktiengesellschaft
Automation & Drives
A&D AS RD ST
PO Box 1963
D-92209 Amberg, Germany
2.3

Operating safety

Standards
The HMI device complies with the following standards:
● EN 954-1
● EN 60204-1
● EN 62061
● EN ISO 13849-1
● ISO 13850
● IEC 61508
● EN 61131-1 and EN 61131-2
● The HMI device was tested for EMC in accordance with the following standards:
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01
Safety of machinery
Safety of machinery – Electrical equipment of machines
Safety of machinery – Functional safety of safety-related electrical, electronic and
programmable electronic control systems
Development, testing and certification of safety-related machine controls
Safety of machinery – Emergency stop – Principles for design
Functional safety of electrical/electronic/programmable electronic-related systems
Programmable Controllers
– EN 61000-6-4, Generic standard – emitted interference
– EN 61000-6-2, Generic standard, Immunity, industrial environments
– EN 61131-2, Programmable Controllers
Safety instructions, standards and notes
2.3 Operating safety
39