Displays On The Charging Station - Siemens SIMATIC HMI Operating Instructions Manual

Operator controls and displays
5.9 Charging station
2. Remove the main battery using the ribbon.
3. Close the charging compartment.
5.9.2

Displays on the charging station

Introduction
There are 3 LEDs on the charging station. The LEDs show the states of the batteries in the
charging compartments and of the power supply unit.
Meaning of the LED displays
Designation
BAT 1
BAT 2
POWER
122
Color Meaning
Green The "BAT 1" LED is off when there is no battery in the first charging
compartment.
The "BAT 1" LED flashes when the battery in the first charging
compartment is being charged.
The "BAT 1" LED lights up when the battery in the first charging
compartment is 95% charged.
Green The "BAT 2" LED is off when there is no battery in the second charging
compartment.
The "BAT 2" LED flashes when the battery in the second charging
compartment is being charged.
The "BAT 2" LED lights up when the battery in the second charging
compartment is 95% charged.
Green/red The "POWER" LED is off when there is no voltage supply to the
charging station.
The "POWER" LED lights up green when the power supply to the
charging station is within the nominal range.
The "POWER" LED lights up red when there is an overvoltage or
undervoltage at the charging station.
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01