Charging Station; Charging Batteries In The Charging Compartment - Siemens SIMATIC HMI Operating Instructions Manual

Operator controls and displays

5.9 Charging station

A charging station is available for safe accommodation of the HMI device. The HMI device is
used as a stationary HMI device when it is hooked into the charging station. The HMI
device's battery is charged in the charging station.
5.9 Charging station
5.9.1

Charging batteries in the charging compartment

Introduction
You can charge one main battery in each of the two charging compartments of the charging
station. The batteries are charged independently of each other.
120
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01