Safety Instructions, Standards And Notes; Safety Instructions - Siemens SIMATIC HMI Operating Instructions Manual

Safety instructions, standards and notes

2.1

Safety instructions

Safety regulations
Injury or material damage
Strictly observe all instructions in this document at all times. Otherwise, hazardous
situations can arise or the safety functions integrated in the HMI device can be rendered
ineffective.
Observe the safety and accident prevention instructions applicable to your application in
addition to the safety instructions given in this manual.
Configuration requirements
Injury or material damage
The configuration engineer for a machine or system PLC must take precautions to ensure
that an interrupted program can be restarted normally after communication errors, voltage
dips, or power failures.
Dangerous operating modes must not occur, not even temporarily, from the entire
sequence of the user program up to troubleshooting.
Proper use
Commissioning of the HMI device is forbidden until it has been absolutely ensured that the
machine which is to be operated with the HMI device complies with Directive 98/37/EC.
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01
WARNING
WARNING
WARNING
2
35