Siemens SIMATIC HMI Operating Instructions Manual page 92

Installation and connection
4.9 Switching on and testing the HMI device
Transfer
The HMI device automatically switches to "Transfer" mode if the following requirements have
been met:
● No project is loaded on the device
● At least one data channel has been configured
While communication is being established, the following dialog box is displayed:
Press "Cancel" to stop the transfer.
Result
The Loader appears.
92
On first commissioning, there is no project on the HMI device and no data channel has
been parameterized.
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01