Danfoss VLT DriveMotor FCP 106 Design Manual page 57

Specifications
Analog outputs
Number of programmable analog outputs
Terminal number
Current range at analog output
Maximum load to common at analog output
Maximum voltage at analog output
Accuracy on analog output
Resolution on analog output
1) Terminals 42 and 45 can also be programmed as digital outputs.
Digital outputs
Number of digital outputs
Terminals 27 and 29
Terminal number
Voltage level at digital output
Maximum output current (sink and source)
Terminals 42 and 45
Terminal number
Voltage level at digital output
Maximum output current at digital output
Maximum load at digital output
1) Terminals 27 and 29 can also be programmed as input. Terminal 29 can also be programmed as pulse input.
2) Terminals 42 and 45 can also be programmed as analog output.
The digital outputs are galvanically isolated from the supply voltage (PELV) and other high voltage terminals.
Control card, RS485 serial communication
Terminal number
Terminal number
Control card, 24 V DC output
Terminal number
Maximum load
Relay outputs
Programmable relay outputs
Relay 01 and 02
Maximum terminal load (AC-1)
Maximum terminal load (AC-15)
Maximum terminal load (DC-1)
Maximum terminal load (DC-13)
Maximum terminal load (AC-1)
Maximum terminal load (AC-15)
Maximum terminal load (DC-1)
Minimum terminal load on 01-03 (NC), 01-02 (NO)
Environment according to EN 60664-1
1) IEC 60947 sections 4 and 5.
Control Card, 10 V DC Output
Terminal number
Output voltage
Maximum load
MG03M302
Design Guide
1) on 01-02/04-05 (NO) (Resistive load)
1) on 01-02/04-05 (NO) (Inductive load @ COSφ 0.4)
1)
on 01-02/04-05 (NO) (Resistive load)
1)
on 01-02/04-05 (NO) (Inductive load)
1)
on 01-03/04-06 (NC) (Resistive load)
on 01-03/04-06 (NC) (Inductive load @ COSφ 0.4)
1)
1) on 01-03/04-06 (NC) (Resistive load)
Danfoss A/S © 12/2018 All rights reserved.
Maximum error: 0.4% of full scale
68 (P, TX+, RX+), 69 (N, TX-, RX-)
61 Common for terminals 68 and 69
01-03 (NC), 01-02 (NO), 04-06 (NC), 04-05 (NO)
24 V DC 10 mA, 24 V AC 20 mA
Overvoltage category III/pollution degree 2
2
1)
42, 45
0/4–20 mA
500 Ω
17 V
10 bit
4
27, 29 1)
6 6
0–24 V
40 mA
42, 45 2)
17 V
20 mA
1 kΩ
12
80 mA
2
250 V AC, 3 A
250 V AC, 0.2 A
30 V DC, 2 A
24 V DC, 0.1 A
250 V AC, 3 A
250 V AC, 0.2 A
30 V DC, 2 A
50
10.5 V ±0.5 V
25 mA
55