Technical Specifications; Power Supply Specifications - Siemens RUGGEDCOM RSG907R Installation Manual

RUGGEDCOM RSG907R
Installation Guide

Technical Specifications

This section provides important technical specifications related to the device.
CONTENTS
• Section 5.1, "Power Supply Specifications"
• Section 5.2, "Failsafe Alarm Relay Specifications"
• Section 5.3, "Supported Networking Standards"
• Section 5.4, "Fiber Optic Ethernet Port Specifications"
• Section 5.5, "Operating Environment"
• Section 5.6, "Mechanical Specifications"
• Section 5.7, "Dimension Drawings"
Section 5.1

Power Supply Specifications

NOTE
When determining cable lengths, make sure the minimum input voltage for the power supply is
provided at the power source.
Hazardous Environments
Power
Supply Type
LO
HI
a
Current consumption may vary based on configuration.
Power Supply Specifications
Input Voltage
Minimum Maximum
11.1 VDC 55 VDC
100 VDC 270 VDC
100 VAC 240 VAC
Internal
Fuse Rating
Nominal
12 VDC, 24
5 A
VDC, 48 VDC
125 VDC,
3.15 A
250 VDC
110 VAC,
3.15 A
220 VAC
Chapter 5
Technical Specifications
Maximum Power
Isolation
Consumption
1.5 kVDC 13.4 W
5 kVDC 15.3 W
5 kVDC 15.5 W
a
29