Siemens RUGGEDCOM RSG907R Installation Manual page 29

RUGGEDCOM RSG907R
Installation Guide
Port
A Not used
B Not used
5 (Coupler) Connect to an Ethernet-capable device if the
RUGGEDCOM RSG907R is configured as an HSR or
PRP RedBox
1 to 4 Connect to an Ethernet-capable device
Connecting to a PRP Network
In this application, the device operates as a PRP RedBox on a PRP network. Connect the device as follows:
Port
A Connect to LAN A
B Connect to LAN B
5 (Coupler) Connect to one or more Singly Attached Nodes
(SANs)
1 to 4
Connecting to an HSR Ring
In this application, the device operates as an HSR RedBox in an HSR ring. Connect the device as follows:
Connecting the Device to the Network
Connect To...
Connect To...
1
3
Figure 18: LAN
1. Ethernet-Capable Device 2. Switch (RUGGEDCOM RSG907R)
3. Router
1
3
B
B A
5
Figure 19: A PRP Network
1. VDAN 2. PRP RedBox (RUGGEDCOM RSG907R)
3. LAN B 4. LAN A 5. DAN (RUGGEDCOM RSG907R
RSG909R;RSG908C;RSG910C) 6. DAN (RUGGEDCOM RSG907R
RSG907R)
Chapter 2
Installing the Device
1
2
2
1
2
B A
4
A
B A
6
19