Required Tools And Materials - Siemens RUGGEDCOM RSG907R Installation Manual

RUGGEDCOM RSG907R
Installation Guide
Figure 1: RUGGEDCOM RSG907R
1. POWER LED 2. ALARM LED 3. USB Console Port 4. RNA Port (Port A/B) 5. Port 5 6. Fiber Optic Ethernet Ports (Ports 1 to 4)
7. Failsafe Alarm Relay 8. Power Supply Terminal Blocks 9. Chassis Ground Screw
POWER LED
ALARM LED
Console Port
Communication Ports
Failsafe Alarm Relay
Power Supply Terminal Blocks
Chassis Ground Terminal
Section 1.3

Required Tools and Materials

The following tools and materials are required to install the RUGGEDCOM RSG907R:
AC power cord (16 AWG)
Required Tools and Materials
3
4
5
6
Illuminates green when power is supplied to the device.
Illuminates red when an alarm condition exists.
The USB Type-B console port is for interfacing directly with the device and accessing initial
management functions. For information about connecting to the device via the serial
console port, refer to
Communication ports in general receive and transmit data, as well as provide access to the
RUGGEDCOM ROS Web interface. For more information about the various ports available,
refer to Chapter 4, Communication
Latches to default state when a power disruption or other alarm condition occurs. For more
information, refer to:
• Section 2.5, "Connecting the Failsafe Alarm Relay"
• Section 5.2, "Failsafe Alarm Relay Specifications"
Pluggable terminal blocks for connecting one or more power sources. For more information,
refer to Section 2.6, "Connecting Power"
Protects the device from power surges and accumulated static electricity. For information
about grounding the device, refer to
Tools/Materials
1 2
7
8
9
Section 3.1, "Connecting to the
Ports.
and Section 5.1, "Power Supply
Section 2.6, "Connecting
For connecting power to the device.
Introduction
Device".
Specifications".
Power".
Purpose
Chapter 1
3