Cellink BIO X User Manual page 66

Licensee acknowledges and agrees that a CELLINK 3D Bioprinter and/or the Licensed
Software may be programmed to print a design that is larger than the bioprinter
print bed can accommodate. CELLINK ASSUMES NO LIABILITY FOR PROPERTY
DAMAGE TO A PRINTER OR OTHER PERSONAL PROPERTY OR REAL ESTATE
RESULTING FROM PRINTING ANY DESIGN USING THE CELLINK 3D BIOPRINTER
AND/OR LICENSED SOFTWARE.
6.2.12 Indemnity
Licensee agrees to indemnify, defend and hold harmless CELLINK, its subsidiaries, officers, directors,
employees, agents, partners, advertisers and suppliers from and against all demands, causes of action,
claims, damages, liabilities, losses, costs and expenses of any kind (including reasonable legal fees
and costs) related to any claim or demand made by any third party. Such claims or demands include
but are not limited to those relating to Licensee's violations of any applicable laws or regulations,
violations of this User License, violations of a third party's rights, including intellectual property
rights, and claims or demands concerning Licensee's use of the Licensed Software or CELLINK
3D Bioprinter. Licensee agrees not to settle any such matter without the prior written consent of
CELLINK. For any matter which Licensee is required to indemnify CELLINK, CELLINK at its sole
option may assume and control the defense at Licensee's expense. CELLINK shall use reasonable
efforts to notify Licensee of any such matter, and Licensee, to the extent reasonable, shall cooperate
with CELLINK in connection with any legal proceedings relating to such matters.
6.2.13 Term, termination, and survival
This User License is effective on the date accepted by Licensee and shall continue unless and
until terminated by CELLINK. Should material breach on the part of Licensee occur, CELLINK may
terminate this User License immediately upon notice to Licensee. If terminated, the license granted
hereunder shall also terminate, however, any terms intended to survive termination will remain in
effect. Upon termination, Licensee agrees to destroy all copies of the Licensed Software in Licensee's
possession. Licensee's obligations under sections 9-15 shall survive the expiration or termination of
this User License.
6.2.14 Export control
Licensee acknowledges and agrees that the Licensed Software is subject to the export control and
trade sanctions laws of the United States and may be subject such laws of other countries ("Export
Control Laws"). Licensee agrees to comply with the Export Control Laws in all respects and will
not export, re-export, or directly or indirectly transfer any technical data acquired from CELLINK in
violation of the Export Control Laws. Licensee will notify CELLINK immediately if a violation of the
Export Control Laws has occurred. If CELLINK determines that such violation should be disclosed
to the applicable export control authority, Licensee agrees to provide assistance and information as
reasonably required to facilitate such disclosure. Licensee agrees to indemnify and hold harmless
CELLINK from any and all claims, losses, liabilities, damages, fines, penalties, costs and expenses
(including attorneys' fees) arising from or relating to any breach by Licensee of its obligations under
this section.
66