Clean Chamber - Cellink BIO X User Manual

4.1 Clean Chamber

Sterilizing with UV light
Do not look directly at UV light and do not expose your skin to UV light. UV light can
cause serious personal injury.
Attention! The UV sterilization procedure will kill or damage any living organisms inside the print
chamber. Remove any of your cells or tissues from the print chamber before initializing the UV
sterilization procedure.
BIO has a UV sterilization system to ensure a sterile environment. The system sterilizes the print
chamber, and Clean Chamber technology maintains the system's sterility. Run the UV sterilization
procedure before each bioprinting.
To begin the UV sterilization procedure, select "Clean Chamber" from the home screen and confirm.
1. UV Sterilization - Tap to start or abort the UV sterilization procedure.
2. Progress indicator.
3. HEPA filter fan - Tap to turn the HEPA filter fan on or off. You can turn the HEPA filter fan on
or off during UV sterilization and during bioprinting.
24
1
2
3