Cellink BIO X User Manual page 44

4.4.2 Printhead and print bed temperature control
Use the second tab of the "Utilities" menu to control printhead and print bed temperature. You have
the option to pre-heat or pre-cool your equipment.
1
2
3
1. Printhead 1 temperature – Set the temperature of the printhead 1.
2. Printhead 2 temperature – Set the temperature of the printhead 2.
3. Printhead 3 temperature – Set the temperature of the printhead 3.
The temperature range for the pneumatic printhead is between room temperature and
65° Celsius.
4. Printbed temperature – Set the temperature of the printbed between 4-60°.
44
4