Bioprinting From A 3D Model - Cellink BIO X User Manual

4.2 Bioprinting from a 3D model

Choose this option to start a new bioprinting process
using a 3D model. BIO X will guide you through the
process of setting up your bioprint.
4.2.1 Open file
Insert a USB drive containing your 3D model and any custom profiles you would like to use into the
USB port on the front of BIO X. Keep the USB drive connected until the bioprinting process starts.
Note: The USB drive needs to be readable and writeable.
Next, choose the model you wish to bioprint. BIO X accepts the file formats .stl, .obj, .amf, and .BIOX.
1
4
1. File list - Tap to select the model you wish to bioprint.
2. Preview - The model currently selected will appear in this window.
3. Home - Use this button to abort the setup process and return to the home screen.
4. Navigation bar - Use this bar to navigate to the next and previous step. A check mark will
appear once a step is completed.
2
3
25