Cellink BIO X User Manual page 42

4.3.5 Print model
This screen summarizes the bioprinting process. You can monitor the activity of each printhead and
curing module while printing.
Always pause bioprinting before opening the door. Do not remove printheads before
bioprinting has stopped. Doing so risks aborting the process and compromising your
cells.
1
1. Printing setups - You can control the setup of your printing during the
whole process.
2. Progress indicator – Allows for an overview of how far the bioprinting
process has come and how long it will take until it is completed.
3. Bioprint - Tap to start the bioprinting process.
4. Pause – Tap to pause the bioprinting process.
5. Resume - Tap to resume the bioprinting process.
6. Cancel – Tap to cancel the bioprinting process.
These options are available when the bioprinting process is paused.
42
2
4
3
5
6