Setting Up Bio X - Cellink BIO X User Manual

3.3 Setting up BIO X

Before connecting BIO X to a wall socket, ensure that the socket is grounded. Next, connect BIO X
to the power outlet (see 2.1 Product map) and the grounded wall socket with the included power
cable.
BIO X has an internal air supply capable of supplying 200 kPa to the printheads. To use a higher
pressure, connect an external air supply to the back of BIO X (see 2.1 Product map.)
Turn on BIO using the power switch on the back (see 2.1 Product map.)
Always connect BIO X to a grounded outlet. Connecting to an ungrounded outlet can
cause equipment damage and personal injury.
Ensure that the external air supply does not exceed the specifications outlined in
Chapter 2.2, Technical specifications. Improper use can use equipment damage and
personal injury.
20