Monitor Output Of Reception Frame Information - Renesas R-IN32 Series User Manual

R-IN32 Series CC-Link Remote device station
7.

Monitor Output of Reception Frame Information

MON7, 6 : Monitor terminals for internal signals. The signals to be monitored are not specified.
MON5 : Set to high when RWw information (bit data) of the own station is being received.
MON4 : Set to high when RY information (bit data) of the own station is being received.
MON3 : Set to high when a communication frame (bit data) other than a flag pattern is being received.
MON2 to 0 : Display the type of frame being received according to the table below.
Table 7.1 Monitor output of reception frame information
MON2 MON1 MON0
H H L
H L H
H L L
L H H
L H L
L L L
R18UZ0056EJ0102
Dec. 28, 2018
Receiving polling and refresh data
Receiving polling data
Receiving test polling and test data
Receiving test polling
Receiving refresh cycle complete
Initial state
7. Monitor Output of Reception Frame Information
Frame type
Page 13 of 83