Setting Details; Setting The Number Of Occupied Stations - Renesas R-IN32 Series User Manual

R-IN32 Series CC-Link Remote device station
6.

Setting Details

6.1

Setting the Number of Occupied Stations

Based on the combination listed below, the number of occupied stations can be set from 1 to 4.With one
communication, 32 I/O bits and 4 words of data can be used per station.
Table 6.1 Occupied stations setting
Number of occupied stations
Terminal
SENYU0
SENYU1
When the number of occupied stations is set to "2":
With one communication, 64 I/O bits and 8 words of data can be used.
:
Caution Fix the IOTENSU pin to the low level. Setting the pin to the high level is prohibited.
R18UZ0056EJ0102
Dec. 28, 2018
1 2
L H
L L
6. Setting Details
3 4
L H
H H
<R>
Page 9 of 83