User Guide
MMI-20019808
Postrequisites
For more information on transmitter installation and wiring, see your transmitter
installation manual. For information on configuring the RS-485 terminals and making an
RS-485 connection, see your transmitter configuration manual.
2.4.1
Modbus terminals
Transmitter
Model 1500
Model 1700 with analog outputs
Model 2500
Model 2700 with analog outputs
Model 3500 with screw-type or solder-tail
terminals
Model 3500 with I/O cables
Model 3700
2.5
Micro Motion Ethernet Config Tool installation
(optional)
Related tasks
Install the Ethernet Config Tool
2.5.1
Ethernet Config Tool system requirements
•
Pentium 133 MHz or higher
•
10 MB of free space
•
8 MB RAM
•
Windows NT v4.0 or higher, Windows 2000, or Windows XP
•
Internet Explorer v4.01 SP1 or higher
2.5.2
Install the Ethernet Config Tool
Procedure
1. Install the software program. Locate and run the EtherNet/IP Module setup
2. Connect the configuration cable from your PC to the EtherNet/IP Module.
User Guide
program on the EtherNet/IP Module Resource CD and follow the on-screen
instructions.
RS-485/A
RS-485/B
33
34
5
6
33
34
5
6
32a
32b
25
24
12
11
Installation
January 2019
13